Home Air Services is proud to provide high-quality residential and commercial services to our local customers. For decades, our well-trained team has provided a wide variety of HVAC services throughout Rockville, Bethesda, and Potomac MD, and the surrounding areas. We are also now serving Northwest and Northeast Washington DC, Nnrthern VA, Alexandria and Arlington.
We are one of the leading HVAC installation contractors in the area because of our quick and responsive services, our great customer service and our first-class HVAC products.
Our service areas include:
Whether you are looking to purchase a new Carrier® system or your home is in need of an indoor air quality evaluation, we’ve got the knowledge and the skills to solve any problem. When you call our team, our NATE-certified technicians will perform a diagnostic that will then help you choose the best solution for your home or business.
Our NATE®-certified technicians at Home Air Services can deal with any HVAC issue. We can make your home or commercial property more energy-efficient and comfortable through our services which include:
Home Air Services is a Lennox Premier Dealer. To maintain this status, we must participate in an independent Customer Satisfaction program. Our previous customers have objectively evaluated our performance and have been completely satisfied. As an authorized Lennox dealer, we have direct access to the latest HVAC models. Our top-of-the-line HVAC products are among the best in the industry. With Lennox, we know that our customers will enjoy a comfortable environment all year-round.
If you want to work with one of the top HVAC installation contractors in the DC metro area, then choose Home Air Services as your reliable service expert. Call us at (301) 585-8100 to learn more about our services and products or to request an appointment.
Nick Love is very good. But I fear we were overcharged.
The HVAC job consisted of replacing 2 residential systems: (1) heat pump (2) A/C and gas furnace. Bottom-line: - competitive pricing - respectful of the home & property - transparent about the work involved, including unforeseen conditions - quality craftsmanship - pulled permits - licensed & insured - technicians were friendly and respectful - pre-job cost estimate included a detailed walkdown of the job - on-time Home Air Services was not the cheapest proposal, but it was competitive. I selected them because during the pre-job estimate they seemed the most thorough and I trusted them to do a good job. I got everything I wanted for a fair price. Moreover, when a warranty issue with a thermostat came up, they came back and addressed it quickly - it was a manufacture's fault not Home Air Services, but they resolved the issue. I would recommend them to family, friends, and co-workers.
I have used Home Air for years and never had any complaints or issues. They are prompt, understanding, and very professional. I plan to continue using Home Air for years to come.
As I regular contract customer whose now bought a furnace and water heater and air from your firm it would be a nice gesture to get a discount on annual contract
Technician showed up promptly for my scheduled seasonal maintenance of the systems in my house. He checked both the heat pump in my basement apartment and the HVAC system in my main house thoroughly inside and out, filters, thermostats--everything! And explained to me what he was doing and how the systems worked.
Norman was polite, knowledgeable, and efficient. Arrived on time, and preventive maintenance service took less than an hour, including dealing with an issue (air gap in unit's housing causing a whistling/vacuum cleaner kind of noise).
Norman arrived early in the time frame (as i had requested), He was very pleasant, professional and thorough in his work. When finished, he explained all to me and assumed me that my boiler was in good shape and believed that to be so for years out.. Excellent!
professional & reliable
Nick Love was absolutely first rate and in every respect a credit to his own and to Home Air's good judgment. And you may quote me! ..Wide ranging understanding both of my problem and of how to solve it most expeditiously. I could not have asked for more or been more pleased with the whole experience. Thanks and congratulations to Home Air! Dan Singer
Took the time to notice a leaking faucet causing water to drip behind the utility sink.
I appreciated Norman’s patience and persistence with my oversleeping and not promptly answering the door.
I can't say much concerning pricing. I've been doing business with HOME ever since I moved into this house. I don't look at price too much; the quality of the service is what counts with me.
We were suddenly without a furnace and we were to go out of town in two days. Nick Love and The Home Air Services crew led by Michael came to our rescue and our furnace was operating and they installed a new one within two days. Meanwhile they did a temporary fix on our old furnace blower which allowed us to have heat until the new furnace was installed. This was all on very cold winter days.
Great service. The technician was excellent and very nice and the guys who installed the new furnace were great. Furnace is working wonderfully.
Very fast and reliable service, although I know it is a busy time of year. Service people were friendly and took time to explain the various parts and procedures.
Norman was outstanding. Showed up right on time, very friendly, answered my questions, took care of business in a thoroughly professional manner.
Nick did a really fine job on our ductless unit. He apprised us if the best and worst case scenarios and ours fell in between as it turned out. Nick was patient, competent and professional throughout the process after
Install gas fittings
In office
Install Bryant heatpump and airhandler and Bryant furnace and Bryant ac and coil
Did annual ac maintenance with cleaning of condenser coil
Performed cooling system inspection and maintenance on heat pump systems.
Installed 75 gallon water heater
I checked ignition,flames, burners and temperature rise. I also checked wires,connections,blower wheel and replaced air filters (2) 16x25x1. I measured amp draws from blower motor and inducer motor. I also measured run capacitor, all within tolerance. I cleaned flame sensor and pressure tubing. I cycled safeties, thermostat, humidifier and checked for water and gas leaks, none found. I checked humidifier for proper drainage. I cycled condensate pump and checked for proper discharge. I checked draft,flue pipe,heat exchangers and gas valve. Furnace and humidifier are operating properly and safely at this time.
I checked ignition,flames, burners and temperature rise. I also checked wires,connections blower wheel and replaced air filter 20x25x1. I measured amp draws from blower motor and inducer motor,both within tolerance. I cycled safeties,time delay and both low and high fire Stages of heat. I checked draft,flue pipe,heat exchangers and controls. I also checked for gas leaks, none found. I cleaned flame sensor and pressure tubing. Furnace is operating properly and safely at this.
Performing heating system inspection and maintenance on one gas furnace and one heat pump systems.
Performing heating system inspection and maintenance on three zone units.
I checked ignition,flames, burners and flue pipe. I also checked wires,connections,thermostat and controls. I cycled safeties also checked for water and gas leaks, none found. I measured amp draws from circulator pump, it’s within tolerance. I performed maintenance on furnace..in order to reduce chances of equipment failure in the heating season. Gas boiler is operating properly and safely at this time.
I measured amp draws from blower motor. I also checked wires,connections, coils and replaced air filter. I checked voltages and relays. I also checked temperature difference across water coils. Customer explained that there was a new noise coming from system. I found an air gap from service door. I showed customer where the air whistling gap was. I sealed the air gap. Heating system is operating properly at this time.
I checked ignitions, flames, burners,heat exchangers and temperature rises. I also checked wires,connections and air filters. I cycled safeties,time delays and all stages of heat. I cleaned flame sensors and pressure tubings. I measured amp draws from blower motors and inducer motors. I also measured run capacitors, all within tolerance. I checked for water and gas leaks, none found. I also checked blower wheels,controls and thermostats. Furnaces are operating properly and safely at this time.
checked wires, connections, coils,blower wheel and replaced air filter. I also checked thermostat,controls and contactor. I measured amp draws from blower motor, outdoor fan motor, electric heaters and compressor. I also measured run capacitors, all within tolerance. I cycled safeties,time delay and defrost. I checked refrigerant charge and temperature difference. Heat pump is operating properly at this time.
We cleaned out all return and supply ducts for the HVAC system. We covered all holes also cleaned all grills. Also cleaned dyers vent. Furnace: I checked ignition,flames, burners and temperature rise. I also checked wires,connections, thermostat and air filter. I measured amp draws from blower motor and inducer motor. I also measured run capacitor, all within tolerance. I cycled safeties also checked for water and gas leaks, none found. I cleaned flame sensor,duct system and pressure tubing. I checked blower wheel,controls,draft, flue pipe and heat exchangers. Furnace is operating properly and safely at this time.
I checked ignitions, flames, burners and temperature rise. I also checked wires,connections,thermostats and controls. I cleaned flame sensors and pressure tubings. I cycled safeties,time delay and also checked for water and gas leaks, none found. I measured amp draws from blower motors and inducer motors. I replaced the air filters 20x25x1(2). I checked flue pipes,blower wheels,drafts and heat exchangers. Furnaces are operating properly and safely at this time.
I checked ignitions, flames, burners and temperature rise. I also checked wires,connections,thermostats and controls. I cleaned flame sensors and pressure tubings. I cycled safeties,time delay and also checked for water and gas leaks, none found. I measured amp draws from blower motors and inducer motors. I replaced the air filters 20x25x1(2). I checked flue pipes,blower wheels,drafts and heat exchangers. Furnaces and humidifiers are operating properly and safely at this time.
Install ball valve and solenoid valve
Installed trim kit for boiler and replaced gas valve and polite assembly with new thermostat
I performed maintenance on gas furnace. To decrease the chances of equipment failure in the heating season. I cleaned E.A.C. filters. I checked for water and gas leaks, none found. I tested for proper and safe operation.
